15
ENGLISH
INSTALLATION
HANDLING
1
1
1
1
17
The storage cylinder, complete with pallet, must be
moved using a fork lift of suitable lifting capacity.
Proceed as follows to remove the storage cylinder from
the pallet.
- Remove the brackets (1)
- Place a platform of about half the height of the pallet
near the storage cylinder. Make sure the platform is
able to support the weight of the storage cylinder
- Carefully rotate and slide the storage cylinder off the
pallet on to the platform
- Make sure that the storage cylinder is perfectly stable,
and then remove the pallet
- Carefully rotate and slide the storage cylinder off the
platform on to the floor
- Remove the platform. Position the storage cylinder as
required.
Fit the feet provided into the holes in the bottom of the
storage cylinder and adjust as necessary to compensate
for any unevenness in the floor.
Summary of Contents for THE/COMBI3 1000
Page 1: ...THE COMBI3 INSTALLATION AND MAINTENANCE MANUAL...
Page 27: ...27 ENGLISH...
