Thermia MBH 200, Installation Manual

Page: 10 / 36

When the heat pump is in position, remove the transport safety. (If the heat
pump should be moved further, put back the transport safety screw.)
The heat pump should be placed on a stable floor with a floor well (so any condensation may drain from the condensation hole in the
bottom of the heat pump), preferably a concrete floor. When placed on a wooden floor, the floor should be reinforced to hold the
weight of the heat pump, including a filled water heater. Consider that condensation water may drip from the drain hole, so take the
necessary steps to protect the floor.
Installation Guide Diplomat Inverter Mini
INQG0102 Thermia AB
10