GB-5
TIPS ON SAVING ENERGY
AUXILIARY MODE
Below are some simple ways to save en-
ergy when you use your air/air heatpump.
Set the proper temperature
•
Setting the temperature to higher or lower
than necessary will result in increased power
consumption.
Block direct sunlight and prevent drafts
•
Blocking direct sunlight during cooling opera-
tion will reduce power consumption.
•
Close the windows and doors during cooling
and heating operations.
-
Turn off the circuit breaker when the
unit is not used for an extended period
of time
•
The indoor unit still consumes a small amount
of power when it is not operating.
Use this mode when the remote control is
not available.
TO TURN ON
Lift the open panel of the indoor unit
and press the AUX button.
•
The red OPERATION lamp (
) on the
unit will light and the unit will start operating in
the AUTO mode.
•
The fan speed and temperature setting are
set to AUTO.
TO TURN OFF
Press the AUX button again.
•
The red OPERATION lamp (
) on the
unit will turn off.
NOTE:
•
If the AUX button is pressed during normal
operation, the unit will turn off.
AUX
ENGLISH
