GB-8
PLASMACLUSTER OPERATION
FULL POWER OPERATION
In this operation, the air/air heat pump
works at the maximum power to make the
room cool or warm rapidly.
1
During operation, press the
FULL POWER button.
•
The remote control will display “
”.
•
The temperature display will go off.
•
The green FULL POWER lamp (
)
on the unit will light up.
A c t i v e a i r p u r i f i c a t i o n m o d e w i t h
plasmacluster ions. Actively reduces
airborne mold.
1
Press the PLASMACLUSTER
button during operation.
•
The remote control will display “
”.
•
The blue PLASMACLUSTER lamp on the
unit will light up.
2
If you pressed the button
while unit is not in operation,
Plasmacluster operation starts
in fan only mode.
1
2
TO CANCEL
Press the PLASMACLUSTER button
again.
•
The blue PLASMACLUSTER lamp on the unit
will turn off.
NOTE:
•
Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the
next time you turn on the air/air heat pump.
•
To turn off the PLASMACLUSTER lamp,
press the DISPLAY button.
TO CANCEL
Press the FULL POWER button again.
•
The FULL POWER operation will also be can-
celled when the operation mode is changed,
or when the unit is turned off.
•
The green FULL POWER lamp (
) on
the unit will turn off.
NOTE:
•
The air/air heat pump will operate at “Extra
HIGH” fan speed for 15 minutes, and then
shift to “HIGH” fan speed.
•
You can not set the temperature or fan speed
during the FULL POWER operation.
•
To turn off the FULL POWER lamp, press the
DISPLAY button.
1
•
The FULL POWER operation will be automati-
cally cancelled in one hour, and the unit will
return to the original settings. The green FULL
POWER lamp (
) on the unit will turn off.
