THERMEx VERTICAL 260, Instruction Manual

Page: 61 / 64

B 540231261206082018
THERMEX
VERTICAL 260
61
TROUBLE SHOOTER
PROBLEM POSSIBLE CAUSE SOLUTION
The hood is not working There is no power Check the power supply to the
hood. Disconnect the power
for approximately 5 minutes
and connect again to check if
the fault is still there.
The hood is not connected to
the power supply Check that the hood is con-
nected to the power supply.
Unplug for approximately 5
min, and connect it again to
check if the fault is still there.
The extraction of the range
hood is not sufficient The pressure valve is blocked Check if objects have fallen
down on top of the valve or
whether the clamp around
the valve is tightened so hard
that the valve cannot open.
Loosen the clamp or remove
the object, if the valve is
blocked.
The duct is jammed ore
blocked Check the duct, and repair if
necessary.
The filters are dirty and
clogged. Check if the filters are clean,
and clean if necessary. See
the section cleaning and
maintenance in this manual.
ENG
LISH
»
SER
VICE