M 536991200913062017
THERMEX
TOP LINK MODUL
71
ADJUSTING TOP LINK
Top Link can be used together with all types of hobs and ovens, and it can thus be necessary to adjust Top Link to the specific hob or oven with which
it is to be used.
ADJUSTMENT OF DIP SWITCH
There are different programmes for Top Link, depending on whether it is a hob or an oven. The dipswitch is set to the selected product.
NOTE: The power must always be disconnected from the transmitter before the dipswitch is set.
It is set on dipswitch 1 whether it is a hob or an oven that is used.
The hood starts as standard at level 2 when the hob is turned on. If it is prefered to start the hood at level 3 instead, this can be set on dipswitch 2.
NOTE: This ONLY applies for connection to hob.
If dipswitch 3 is set to ON, there will be a delay before the hood is turned on.
If Top Link is connected to a hob, the delay will be around 10 seconds. If it is an oven, the delay will be around 30 seconds.
Hob
Oven
ENG
LISH
»
A
D
JU
ST
IN
G T
O
P L
IN
K
Delay is activated
Without delay
The hood turns on at level 2
The hood turns on at level 3.
Summary of Contents for TOP LINK MODUL I
Page 2: ......
