THERMEX
SUPERCOOLER VI
B 602099300210062016
48
USE OF THE PRODUCT
SuperCooler VI can be used for cooling, heating or as a dehumidifier. SuperCooler VI is set to the function one wishes to use. The functions are
controlled via the control panel or the enclosed remote control.
SuperCooler VI is turned on and off by pressing the on/off button. The first time SuperCooler VI is switched on after having been discon-
nected from the power, it will be in cooling mode. If the SuperCooler VI is turned on and off without disconnecting the power, it will be the last
selected function that is turned on. SuperCooler VI can be turned off regardless of which function is activated.
When switching between functions, e.g. from dehumidifying to cooling, there will be a changeover period of about three minutes before the
selected function starts. This is to protect the compressor in SuperCooler VI. The icon for the selected function will flash during the change-
over period and be constantl once the function has started.
NOTE: If SuperCooler VI stops during heating or cooling, and the letters DF flashes in the display, it means that SuperCooler VI is in the
process of a defrosting cycle. Heating or cooling will start automatically once SuperCooler VI is defrosted.
Before starting up SuperCooler VI, the ventilation hose must be mounted. The exhaust outlet leads excess heat or cold air away from the
room where SuperCooler VI is placed.
When using SuperCooler VI for heating or cooling it is important that the exhausts are facing the correct way:
EN
GL
IS
H
»
U
SE O
F T
H
E P
R
O
D
U
CT
Set the ventilation hose on the exhaust by screwing it carefully
down into the flange.
Lead the exhaust outlet out of the room, for example through a
window.
Cooling
Heating
Summary of Contents for SUPERCOOLER VI
Page 2: ......
Page 54: ...THERMEX SUPERCOOLER VI B 602099300210062016 54 ...
Page 55: ...B 602099300210062016 THERMEX SUPERCOOLER VI 55 ...
