M 520232061204092018
THERMEX
MANcHESTER SMART
37
EN
gl
ISH
»
INS
TALL
ATION
INSTALLATION
The hood is supplied with an internal motor and can be used with the exhaust venting into the open air or for recirculation of air. The hood can
also be installed in two different ways.
Follow the steps in these instructions that match your choice.
EXHAUST VENTING INTO THE OPEN AIR
If the hood is used with the exhaust venting into the open air, the exhaust change in the hood must be set correctly and the exhaust flange must
be mounted on the hood. This is carried out in the following steps:
REcIRcULATION
If the hood is used for recirculation, the exhaust change in the hood must be set correctly. The cover panel must also be mounted on the hood.
This is carried out in the following steps:
Remove the filters from the hood.
Set exhaust change for exhaust venting into
the open air.
Mount the exhaust flange onto the top of
the hood.
1
2
3
Replace the filters inside the hood.
4
Remove the filters from the hood.
Set the exhaust change for exhaust venting
into the open air.
Replace the filters inside the hood.
1
2
3
