THERMEx Kubisma, Manual

Page: 35 / 62

English
35
Control panel
Arrow up/down Speed 6. Filtercleaning Intervalsuctiong
Dimmer 1-2-3
2. Light 3. Motor 4. Turbo 5. Timer 1. Switch on/off
Control Panel
1. Switch on/off the cooker hood (light, motor etc.).
2. Light (press lightly arrow up/down = dimmer up/down).
3. Turn on the motor (the display shows speed 1-2-3).
4. Turbo function (light diode shows, when the function is chosen).
5. Button for timer. Is this function chosen, the ventilator stops automatically
after the chosen time period (display shows 1-99 minutes at an interval of 5 minutes).
6. Light diode for cleaning of fat filters. After a time interval (about 30 hours) the display
(CL) shows that the fat filters are to be cleaned. Resetting of light diode:
Hold the switch-off button for about 15 seconds, until the light diode is switched off.
Extra Functionings:
Control of house ventilation
Through the control panel the user has the possibility to program the interval suction.
The user can choose between 0, 5, 10 or 15 minutes of ventilation with an interval of one
hour. The first time it starts one hour after being activated. The interval suction for room
ventilation is always in progress at the lowest speed.
Programming of interval suction
Switch on the cooker hood (1)
Press the turbo button to change the time
The display shows the chosen time period:
00 = interval suction has not been connected
05 = 5 minutes
10 = 10 minutes
15 = 15 minutes
When periodical ventilation has been activated, a point is twinkling in the timer display.
Attention! The cooker hood can normally always be used, even though the interval suction
is running.