THERMEx H 10 O, User Manual, Page: 10 / 94

Powered EWH does
not heat water. No
backlights of indicator
lamps.
Thermal switch tripped or
not on.
Disconnect EWH from the
mains, remove EWH protective
cover, press the safety button
until you hear a click, place the
cover and turn on power.
These faults are not defects of EWH and shall be fixed by the consumer or by
a specialized organization at his own expense.
DISPOSAL
When complying with the rules of EWH installation, operation and
maintenance and when water quality complying with current standard the
manufacturer sets EWH lifespan of 7 years.
When disposing of the EWH comply with local environmental laws and
guidelines.
The manufacturer reserves the right to make changes to the design and
specifications of the heater without prior notice.
MANUFACTURER'S WARRANTY
The manufacturer sets 2 years as the period of warranty for water heater.
. If there is no or corrected date of sale and shop stamp, the warranty period is
calculated from the date of EWH manufacture. Claims within the warranty period
are accepted only on presentation of the warranty card with marks of the seller, and
the identification plate on the casing of the EWH. EWH serial number consists of
thirteen digits. The third and fourth digits of the serial number are year of
manufacture, the fifth and sixth digits - month of release, the seventh and eighth
digits - day of EWH release. Claims within the warranty period are accepted only on
presentation of the guarantee card with marks of the seller, and the identification
plate on the casing of the EWH.
The warranty shall apply to EWH only. Malfunction of relief valve or power line
cord shall not entail replacement of EWH. Responsibility for compliance with
principles of installation and connection shall be borne by the buyer (in case of
connection by his own) or by the installer carrying out connection.
Recurring maintenance and timely replacement of magnesium anode are
compulsory conditions for long operation of EWH and survival of warranty
obligations of the manufacturer.
The first replacement of magnesium anode shall be not later than 25 months
from the date of EWH installation (in case of no mark of installation in warranty
certificate with the seal in installation company, the term is calculated from the date
of manufacture). Later magnesium anode shall be replaced at least once a year.
Anode replacement shall be provided with mark and seal of servicing company in
the warranty certificate.
When installing and operating EWH, the consumer is obliged to comply with
requirements ensuring trouble-free operation of the appliance during the warranty