THERMEx Decor 660, Manual

Page: 25 / 40

If any problem occurs, please remove the plug from the socket and contact the nearest
maintenance centre or call an authorized person to effect any repairs.
Problem Cause Solution
Light on, but motor The leaf blocked. Get rid of the blocking.
does not work. The capacitor damaged. Replace capacitor.
The motor jammed Replace motor.
bearing damaged.
The internal wiring of motor off Replace motor.
or a bad smell from the motor.
Beside the above mentioned, check the following:
Light does not work, Light damaged. Replace lights.
motor does not work. Power cord looses. Connect the wires as per the
electric diagram.
Oil leakage. One way valve and the air Take down the one way valve
ventilation entrance are and seal with glue.
not tightly sealed.
Leakage from the connection of Take U-shaped section down and
U-shaped section and cover. seal with soap or paint.
Body shaking. The leaf damaged and Replace the leaf.
caused shaking.
The motor is not tightly locked. Lock the motor tightly.
The body is not tightly hanged. Fix the body tightly.
Insufficient suction. The distance between the body Readjust the distance.
and the gas top too long.
The Hood may be installed too Choose a new place and
close to windows or doors which reinstall the machine.
when open may cause excessive
wind interference.
The machine inclines. The loose of the fixing screw. Fix tightly the hanging screw and
make it horizontal.
The loose of the hanging screw. Fix tightly the hanging screw and
make it horizontal.
Potential Problems and Solutions
English
25