THERMEAU TH-150, Owner'S Manual, Page: 14 / 24

14
OwNER’s mANuAl
CHAuFFE-PIsCINE COMMERCIAL POOl HEAT PumP
Temperature
and parameter
display
Access
to parameters
Heating mode
Compressor running
Heating mode
To raise the desired
temperature or to
change parameters
To lower the desired
temperature or to
change parameters
Electronic Temp. Controls
All units
Description
The control located on the front of your heat pump has a large three-character
display for the water temperature, set points, and diagnostics (see figure 5
for front panel appearance). The three button keypad includes sET, DOwN
arrow, and uP arrow buttons. lED indicators next to the display show if the
heat pump is in the pool mode or in the spa mode and if the unit is running.
Service Analyzer Control
The control panel is factory set to display the temperature in Fahrenheit degrees.
Fig. 5