background image

Copyright © 2010 GreenTech Environmental; All Rights Reserved

10

Safety Info & Warnings

1.  Do not operate the heater if any cord or part of the machine is damaged or has malfunctioned.   

Return heater for examination and repair if damage has occured. 

2.  Do not plug heater into anything other than a 3-prong 110V 15amp or higher grounded circuit receptacle. 

3.  Do not use an extension cord to power this heater. 

4.  Do not block the front grill or rear filter of the heater.  Be sure that there is adequate space around the heater 

for air flow. 

5.  Keep heater away from areas which may have standing water.  The heater is not made for use in bathrooms, 

laundry areas or areas with similar attributes. 

6.  Do not insert any foreign objects into the vent as this may cause an electric shock or damage the heater itself. 

7.  Do not change the heater’s wiring or design as it will void the warranty and could cause injury. 

8.  Always unplug heater when not in use. 

9.  Turn heater off before removing plug from outlet. 

10. Do not place cord under any kind of covering such as carpet, rugs or similar articles.  Place cord away from 

high traffic areas to keep from injuring a person or causing damage to the cord or heater. 

11. Heater is intended for indoor use only, do not use outdoors. 

12. The filter must be cleaned regularly to avoid clogging and possible malfunction of the heater.  If the heater 

is used in high-traffic areas the filter must be cleaned more often. 

13. Air dry the filter, do not use any other method to expedite the process as it could damage the filter.

Summary of Contents for Polar













Reviews: