D
D
Remove protective
cap from housing
Insert steamhead
into housing
Apply a small amount of
supplied lubricant directly
on the o-rings.
Use the supplied
silicone to adhere
the steamhead to
the wall
7
Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details.
THERMASOL.COM
I
800.776.0711
Once the shower wall is complete and the housing
is sealed to the wall, remove the protective cap and
insert the steamhead into housing. Use the supplied
silicone to adherethe steamhead to the wall sealing
out any water from getting behind the head.
Use supplied o-ring lubricant to assist in steam head
installation. A very small amount is all that is need directly
on the o-rings.
Upon final installation mount steamhead with
facing up
to allow aromatherapy well to dispense steam.
For detailed installation instructions of the steamhead please
see Installation section in thermasol.com/customer-support
MicroTouch Control and Steamhead Installation Instructions
Allow24hoursforsiliconetodrybeforeuse
