8.2.1.3. Waiting Fire
After charging the pellets, the auger switches off, and the pellets are expected to be ignited. If
the flue temperature exceeds the threshold set at factory, the controller goes directly to the
present fire phase
8.2.1.4. Load Pellet/Waiting Fire
Waiting for the phase of the flame, on display shows one of the following alternatives. It is
expected that smoke temperature exceeds the threshold set at factory to go to the “fire
present” phase.
or
8.2.1.5. Fire Present
After the smoke temperature has reached and exceeded a pre-set value, the system goes
into start-up mode and shows the following message on the display. In this phase exhuast