7
INITIAL START-UP
7.1. Before start-up
Check that the fire pot and its ring above are positioned correctly and rests properly on the
base. Fire pot ring fits into fire pot by its sides. Fire pot ring ensures all pellets will enter the
fire pot, protects burning pellets from moving out from the pot. So, it is very important to keep
that ring during stove operation.
Once the power cable is connected in the rear part of the stove, turn the switch to position (I).
To switch the stove on or off press ON/OFF button (4) on the control panel.
7.2. Loading the pellets
Fuel is loaded by lifting the cover on the upper part of the product. Slowly pour the pellets into
the hopper. Be careful as the cover could become very hot. No other type of fuel other than
pellets, in compliance with above-mentioned specifications, is to be inserted into the hopper.
WARNING
Do not allow sawdust to accumulate on the bottom of the hopper.
Do not leave leftover pellets on top of the stove – they could catch fire!