5
!
Material losses
The appliance has a high centre of gravity and low overturning moment.
f
f
Safeguard the appliance against falling over.
f
f
Only set the appliance down on an even base.
!
Material losses
The appliance casing is not designed to withstand strong forces. Incorrect handling can lead to material
losses of considerable extent.
f
f
Observe the information on the packaging.
Only remove the packaging shortly before the installation.
Where possible, do not unpack the appliance until it has arrived in the installation room.
For transport and handling leave the appliance in its packaging and on the pallet. This enables brief horizontal
transport and provides places to hold on to during transport.
If the appliance has to be unpacked before transportation, we recommend using a hand trolley. Pad the con-
tact surfaces to avoid damaging the appliance. Secure the appliance using a strap. Pad between the strap and
the appliance and avoid overtightening the strap. Where stair wells are narrow, you can carry the appliance
by the handles on the sack truck or trolley and the foot of the appliance.
Vehicular transport
!
Material losses
The appliance must generally be stored and transported vertically.
On tarmac, asphalt, bitumen or otherwise paved roads you may transport the appliance horizontally over a
maximum distance of 160
km. Strong shocks are not permissible.
!
Material losses
If transported horizontally, the appliance must always be laid on the shaded side of the box.
The appliance must not remain in a horizontal position for more than 24
hours.
If the appliance was transported horizontally, leave it to rest in a vertical position for at least one hour
before commissioning.
f
f
Observe the information on the packaging.
D
00000
3
4
7
9
7
1
1
1 Recessed grips
Transport from vehicle to installation room
The cardboard box has reinforced handholds (recessed grips). You can use these recessed grips, as well as
the pallet at the lower end, to carry the appliance into the installation room. Take note of the weight of the
appliance and ensure a sufficient number of personnel is available for handling the appliance.