Thermaltronics TMT-HA200, User Manual

Page: 7 / 10

3
TMT-HA200 Hot Air Tool
USER MANUAL
UNPACKING/ASSEMBLY/OPERATION
Please read this manual and follow the directions before using the equipment. The carton contains:
1. TMT-HA200 Hot Air Tool
2. Handpiece Holder
3. HTN-D30, HTN-D50, HTN-D80, HTN-D100 nozzles
4. HA-HE200 Heating Element
5. IC Popper
Important: Keep all shipping materials until satisfactory operation has been verified.
Assembly and Operation
1. Remove TMT-HA200 Hot Air Tool from its box and place on a suitable work bench.
2. Install the handpiece holder onto the side of the system with a screw driver.
3. Select the proper nozzle and secure it to the handle.
4. Ensure the hot air gun is placed in the handpiece holder.
5. Connect the AC plug to a suitable AC power outlet.
6. Switch the power switch to the “on” position.
7. Adjust the air flow and temperature.
8. The unit is now in sleep mode, with the power off and both the heating element and airflow off.
9. To activate the unit, lift the hot air gun from the holder.
10. After the heating element reaches temperature. The unit should then be read to use.
Power Off
1. Place the hot air gun back into the holder.
2. This will start the auto cool process, after the temperature has dropped down to safe levels, the
fan will automatically shut down and the unit will enter sleep mode.
3. Switch off the unit, unplug if not used for extended periods of time.
CONTROL PANEL
Temperature Knob
Air Flow Knob
Power Switch
Hot Air Gun
Handpiece Holder
ESD Paint
Power Indicator LED
Temperature
Indicator LED
Calibration