Thermaltronics AF-KIT, User Manual

Page: 5 / 16

2
www.thermaltronics.com support email: support@thermaltronics.com
SYSTEM FEATURES
Functions & Features
(1) Function Panel - Allows operation of the auto solder feeder including feeder mode selection
(single / continuous), solder feed speed, solder feed quantity and solder return quantity. (See:
Control Panel - Function Buttons)
(2) Auto Feeder Switch - Pressing the switch will feed solder to the tip based on the settings set on
the Function Panel.
(3) Wire Adjustment Assembly - Allows adjust of the solder wire feed and solder wire tension.
(4) Solder Spool Holder - Utilizes a ball bearing movement system to easily change and hold solder
wire spools.
(5) Guide Pipe Assembly - Tube assembly for guiding the solder wire from the Solder Spool Holder
to the solder tip.
(6) Hand Piece Holder - Place the soldering hand piece into the holder. Use the knobs to loosen or
secure the hand piece in place.
SAFETY PRECAUTIONS
Warning
1. Use this equipment in a well-ventilated area, away from combustible equipment.
2. Place handle in stand when not in use.
3. Do not damage the guide pipe by bending or twisting it.
4. Do not allow the solder tube to be bent at a severe angle. Otherwise, it will become
clogged with solder.
5. Handle with care.
- Never drop or sharply jolt the unit.
- The unit contains delicate parts that can be damaged if subjected to physical force.
- Do not spill any liquids into the unit.
6. Turn off the power when the unit is not in use.
7. Do not alter the unit in any manner.
8. Use only genuine replacement parts.
9. Do not work on electrically live parts.
10. Do not leave the appliance unattended when it is on.
11. Be careful with the fumes produced when soldering.
12. Do not apply excessive force when installing and removing nozzles.
13. Do not use pliers to pull the edges of the nozzle.
14. Do not use the units for any purpose other than soldering or rework. Incorrect use
may cause fire.