Thermaltake X1 RGB, User Manual

Page: 12 / 102

TT Premium | X1 RGB Gaming Software
On-the-Fly Macro
Recording
Macro Recording ( only available under Game Mode ):
(1). Press Fn + PrtSc to enter recording mode ( the entire keyboard will light up and the Record button
will begin to flash ).
(2). Press Fn + any key ( excluding the Recording key ) to specify a key to save the macro under ( a red
light will appear after a slight delay; if you press Fn + the same key, a blue light will appear without a
delay
). Once the key selection is completed, all lights on the keyboard will go out, and the Recording
key will change from flashing to constantly lit.
(3).Enter the sequence to be recorded ( keys recorded will flash in aquamarine ).
(4).After the sequence is entered, press Fn + PrtSc to exit recording mode ( the light for the Recording
key will go off ).
※
This feature is only available under Game Mode.
※
When a key has been designated for macro assignment, before any keystrokes are recorded, the key
assignment can be changed by pressing Fn + another key.
※
While in recording mode, if the key's backlight is solid white, that means there is currently no macro
assigned to this key. If the key is solid green, that means a macro has been assigned to this key ( as
shown in the following figure: the "A" key has a macro assigned to it ).
※
Press and hold a key which has been assigned a macro for more than 3 seconds to erase the saved
macro.
+
Keyboard Features
Features Overview
12