Toughpower Grand
Toughpower Grand
Note: Make sure that your system is turned off and unplugged.
Disconnect the AC power cord from your old power supply.
03
04
3.
Power Connector Introduction
Note: Make sure that your system is turned off and unplugged.
Disconnect the AC power cord from your old power supply.
1. Install the PSU into the case with the four screws provided.
Include the two vibration absorbent gaskets (recommended)
that come with the unit.
2. Connect the 24-pin Main Power
Connector to your motherboard.
MODELS
Connector Type
Connectors & Cable length
650W
750W
24pin
EPS/ATX 12V 4+4pin
EPS 12V 8pin
Molex & FDD
SATA
PCI-E 6pin
4. Installation Steps
PCI-E 8pin
PCI-E 8pin to 6pin adapter
1 x 24pin Main connector
(550mm)
1 x
(550mm)
EPS/ATX 12V 4+4pin connector
1 x EPS 12V 8pin connector
(550mm)
4 x Peripheral & 1 x FDD connectors
(500mm + 150mm + 150mm + 150mm + 150mm)
4 x Peripheral
(500mm + 150mm + 150mm + 150mm)
4 x S-ATA connectors
(500mm + 150mm + 150mm+ 150mm)
4 x S-ATA connectors
(500mm + 150mm + 150mm + 150mm)
2 x 6pin PCI-E connectors
(500mm)
2 x 8pin PCI-E connectors
(500mm)
2 x 8pin to 6pin PCI-E adapter
(150mm)
Cable
P/N
TPG-650M
TPG-750M
650W
750W
Main Power Connector (24Pin)
EPS/ATX 12V Connector (4+4PIN)
EPS 12V Connector (8Pin)
SATA Connector (5P)
Peripheral Connector (4Pin)
FDD Connector (4Pin)
1
1
1
1
1
1
8
8
1
1
8
8
2
2
2
2
PCI-E Connector (8P)
PCI-E Connector (6P)
