User's Manual
VB6000B Series - Swing
2.4 Front Fan Filter Removal and Cleaning
5
6
Take off the front bezel, then the filter
can be removed and washed.
1
Each motherboard has different standoff layout. It is highly
suggested that you refer to your motherboard's manual when
installing motherboard into Case. This is applicable with Standard
ATX, Micro ATX motherboards. Your motherboard may require a
special I/O Panel, which should be included with your motherboard.
Case include the standard I/O Panel which is used by majority of
today's motherboard.
Placement Direction:
When Installing the motherboard, make sure you follow the direction
provided by your motherboard manufacturer. On most standard
motherboards, the edge with external ports goes to the rear part of the
chassis. It is highly recommended that you install CPU, heat sink and
modular components before fixing the motherboard inside the chassis.
= the locations of
the screw holes.
Note these locations
and place included
standoffs on the
chassis first.
This side
towards the rear
of the chassis
Above illustration is a sample of what the motherboard's layout. For more detail
screw hole placement, please refer to your motherboard manual.
3.1 Motherboard Installation
