VH8000 Series
Beyond the past, Exceed the present, Surpass the competition
E
n
g
lis
h
E
n
g
lis
h
30
29
Connect the
Quickconn connector.
Connector the Quickconn connector
Out
In
4.6 12cm Radiator & Main Unit
Connect the 4-pin connector
of 12cm fan to power supply.
Pre-built 12cm radiator
Connect the yellow wire(RPM signal)
to the motherboard's fan connector.
Pre-built main unit in
5.25 drive bay.
Connect the 4-pin connector
of pump to power supply.
4.7 Fill Coolant
Open the top sliding hood of the chassis,
and remove the accessory storage.
Fill the tank up
with coolant.
Turn on the PC power switch.
Liquid level will decrease when
you power on the system,
please keep filling coolant until
the tank is filled up.
Close the cover
of liquid tank.
cap
Please make sure liquid is
flowing continuously and
smoothly within the tube.
12cm Radiator
Main Unit
