The Ultimate Cooling Solutions!
www.thermalright.com
12
Step 5:
Step 6:
Step 7:
Step 8:
Step 9:
Step 8: Fan Installation
Place the included TY-140 Black onto the Heatsink
Body. And then secure it with the Fan Clips, by
pulling the Fan Clips to place the four ends at the
four holes on the TY-140 Black.
Step 6 : Apply the Chill Factor IV
Apply the Chill Factor IV to the base of the heat-
edge, like a business card or an old credit card
IV.)
Step 9: Installation completed
Plug in the fan connector to the CPU PWM Fan
socket on the motherboard. Installation complete.
Step 7: Easy Access
Place the Heatsink Body on top of the CPU. And
then use the two M3L7 Screws to secure the
Anchoring Mount.
Step 5 : Anchoring Mount Installation
Place the Anchoring Mount on the Screw
Anchoring Mount on to the Screw Nuts.
1
2
4
3
