Page 23
BASECAMP OPERATOR MANUAL
8.4.12 Blower Belt Replacement:
1.
For ease of access remove the intercooler to manifold pipe (will be either 10mm
or 7/16").
2.
Remove the (7) bolts on the side belt guard of the blower, a 9/16
”
wrench is
required.
3.
Then remove the (2) vibration dampener bolts using a 13MM wrench.
4.
Slightly loosen (
do not remove
) the (4) blower fan bearing bolts using a 11/16"
wrench
5.
Loosen the tensioner bolt (requires a 3/4" socket and 3/4" wrench) until the belt
is loose enough to remove (prybar may be needed to assist). If it doesn't move
freely with a prybar, further loosen the tensioner bolt
6.
Remove the belt, ensuring that you do not have to roll it or kink it to take it off as
this will damage your new replacement belt during the install.
7.
Install replacement belt. It should not need to be forced on.
8.
Put unit back together in reverse order.
8.4.13 Blower Belt Tension:
1.
Test belt tension and record value for future records.
2.
Loosen 7/16 Ny lock nuts on bearing.
3.
Loosen 1/2 lock nut on tensioner.
4.
Adjust tensioner bolt till adequate tension is applied to belt.
5.
When retightening bearing 7/16 Ny lock nuts tension will increase significantly.
a.
Final running tension should be within:
i.
New belt 140 lb. to 150 lb.
ii.
Used belt reinstalled 130 lb.
1.
Tensioner should sit straight when checking belt tension.
8.4.14 Light Tower Maintenance:
1.
Inspect mast/winch cables regularly.
2.
Lubricate cables after every wash with a dry wire rope lubricant.
8.4.15 Light Tower Lens Adjustment:
1.
Utilizing a 13mm wrench users may adjust the individual light lenses to the
desired angle.
2.
For adjusting the entire bracket assembly up or down you will require a 16mm
(outside) and 17mm (inside) to loosen the bracket and adjust the angle.
Summary of Contents for BASECAMP
