Thermal Intelligence BASECAMP, Operator'S Manual

Page: 21 / 30

Page 21
BASECAMP OPERATOR MANUAL
8.4.9 Engine Oil Check:
1. If engine was running, wait ten minutes before proceeding.
2. Remove dipstick and wipe it dry with a lint free and clean
cloth.
3. Insert the clean dipstick. Verify the dipstick is fully seated.
4. Remove the dipstick and look at the oil level on both sides.
The lower of the two readings is the correct oil level.
5. Add oil (if necessary) to adjust the level. After adding or
changing the oil, run the engine for one minute before checking the oil level.
Wait ten minutes to allow the engine to cool and oil to fully drain into the oil
pan.
8.4.10 Battery Check:
1. Battery maintenance checklist should be performed monthly. Always wear
approved eye protection when working with batteries and
wash hands after handling.
2. Inspect battery posts and cables for tightness and corrosion.
3. Tighten and clean cables and posts as necessary. If required, use battery contact
cleaner.
4. Coat the battery posts with dialectic grease, after tightening and cleaning.