CUTMASTER 25mm
INTRODUCTION
2-2
Manual 0-5080
2.04 Power Supply Specifications
CutMaster 25mm Power Supply Specifications
Input Power
380 VAC (360 - 440 VAC), Three Phase, 50/60 Hz
400 VAC (360 - 440 VAC), Three Phase, 50/60 Hz
Input Power Cable
Power Supply includes input power cable.
For cables at other input voltages see section 2.05.
Input Power Cable
Power Supply includes input cable.
Cable for 400V 3Phase.
Output Current
20 - 80 Amps, Continuously Adjustable
Power Supply Gas
Filtering Ability
Particulates to 5 Microns
CutMaster 25mm Power Supply Duty Cycle *
Ambient Temperature
Duty Cycle Ratings @ 40° C (104° F)
Opperating Range 0° - 50° C
IEC
Rating
IEC
Rating
IEC
Rating
All Units
Duty Cycle
40%
60%
100%
Current
80 Amps
65 Amps
50 Amps
DC Voltage
112
106
100
* NOTE: The duty cycle will be reduced if the primary input power (AC) is
low or the output voltage (DC) is higher than shown in this chart.
NOTE
IEC Rating is determined as specified by the International Electro-Technical Commission. These specifications
include calculating an output voltage based upon power supply rated current. To facilitate comparison between
power supplies, all manufacturers use this output voltage to determine duty cycle.
Power Supply Dimensions & Weight
Ventilation Clearance Requirements
22.5"
0.57 m
43 lb / 19.5 kg
10.75"
273 mm
16.375"
416 mm
Art # A-07941
6"
150 mm
24"
610 mm
6"
150 mm
6"
150 mm
Art # A-07925_AB
ARC WELDING SUPPLIES - 07 847 7870
