TITAN 1280 USER MANUAL
16
NO.
Name
Type
Description
76
EXT_SYNC
Input
Input (3.3V)
Reserved (off by default)
57
LVDS_D4P
Output LVDS (2.5V)
Data signal
59
LVDS_D4N
Data signal
61
LVDS_D3N
Data signal
63
LVDS_D3P
Data signal
65
LVDS_D2P
Data signal
67
LVDS_D2N
Data signal
69
LVDS_D1N
Data signal
71
LVDS_D1P
Data signal
75
LVDS_CLKP
Clock signal
77
LVDS_CLKN
Clock signal
5, 6, 7,
8, 19,
20, 40,
41, 55,
58, 68,
70, 73,
79, 80
GND
Power
Ground of power
3
Note:
1.
Typical value of power supply is 4 V DC; here refers to the voltage value of the thermal camera
connector, power setup time (10% ~ 90%) < 4 mS, peak current > 1.0 A, ripple and noise < 40
mVp-p. All these requirements shall be met when the power supply reaches to the connector
on the core.
2.
All the TX and RX of serial communication interfaces refer to the thermal camera’s sending
and receiving.
3.
GND and VGND are shorted internally.
