THERMAFLOW LTD | THERMAFLOW® ELECTRIC COMBINATION BOILER |
Tel: 0870 850 5207
6
The unit should be positioned in a manner that allows access to all components for future
maintenance.
If located in a cupboard the unit should be positioned with all components facing the entrance to
allow elements to be replaced if required or any of the other components.
0.6 Water
Connections
There are six water connections to be made when installing the Thermaflow.
They are as follows:
1) Flow and return connections to the heating system are 22mm compression or push fit.
2) Cold water inlet-22mm compression.
3) Hot water outlet -22mm compression.
4) Pressure relief valve- 15mm compression.
5) The pressure relief valve connection should be used for no other purpose.
6) The heating expansion vessel- 22mm compression or push fit.
