195
1.800.735.4328 | THERMADOR.COM
WARMING DRAWER
30-INCH TRADITIONAL
Models: WD30ES, WD30EP
W
ARMING DRA
WERS
30-INCH TRADITIONAL WARMING DRAWER AND
CUTOUT DIMENSIONS
1
"
minimum space
is recommended
between the bottom
of the oven and the
top of the Warming
Drawer, if the Warming
Drawer is installed
below a single oven.
CUSTOM FRONT PANEL (OPTIONAL)
Custom Drawer Front Dimensions
Build custom drawer front to the dimensions specified below. All four
edges must be finished. If using wood, the back must be sealed to prevent
moisture damage.
Pilot Holes
1/2" (12.7 mm)
Diameter Hole
29
3/4
"
11
1/4
"
3
5/8
"
2
3/16
"
2
3/4
"
1
5/8
"
24
3/8
"
INSTALLATION OPTIONS
WALL-MOUNTED INSTALLATION
Thermador Warming Drawers may be installed
below any Thermador Single or Double Built-in
Oven. A minimum space of 1" is recommended
between the bottom of the oven and the top of the
warming drawer. Refer to the built-in oven section for
additional details.
UNDER-COUNTER INSTALLATION
Thermador Warming Drawers may also be installed
below any Thermador Electric or Non-professional Gas
Cooktop as long as there is no contact between the
bottom of the cooktop and the top of the warming
drawer. When installing below a Thermador Induction
Cooktop, a minimum 1" air gap must be maintained
between the bottom of the cooktop and the top of the
warming drawer. When installing below a Thermador
Professional Rangetop, a minimum 2
3
/
4
" air gap must
be maintained between the bottom of the cooktop
and the top of the warming drawer. Refer to the
appropriate cooktop or rangetop section for
additional details.
CUSTOM FRONT PANEL (OPTIONAL)
This Thermador Warming Drawer may be installed with
an optional custom front panel. The panel should be
built to the specifications noted.
The cabinet base must be flat and capable of
supporting a weight of at least 110 lbs. (50 kg).
