Thermador T36FT Series, Use And Care Manual

Page: 28 / 96

en-us Eliminating faults
28
Fault Cause and troubleshooting
Water is dripping from the water
dispenser.
Air is in the water system.
▶
Keep dispensing water until it contains no more air.
The water dispenser is not func-
tioning.
There is no water supply.
▶
Ensure that there is a water supply and that the shut-off valve on the water con-
nection is open.
Contact an installer if necessary.
Kink in the water hose.
▶
Turn off the water supply and straighten the kink in water hose.
If necessary, replace the water hose.
Ice cube production is low. The appliance has only recently been connected.
▶
Wait approximately 4 hours until the first batch of ice cubes is ready.
The freezer compartment has been opened frequently or for an extended period of
time.
▶
Check ice cube production after a few hours.
Low water pressure.
▶
Check the water pressure of the water supply system or the external water filter
system.
Connect the appliance only to a water connection with sufficient water pressure.
The water filter is blocked.
▶
Change the water filter.
→
Page 20
Food or objects are blocking the fill level sensor for the ice cube maker.
▶
Remove all food or objects from the ice storage container.
The ice cube maker is not function-
ing.
Ice cube production is switched off.
▶
Switch on ice cube production.
→
Page 21
There is no water supply.
▶
Ensure that there is a water supply and that the shut-off valve on the water con-
nection is open.
Contact an installer if necessary.
Kink in the water hose.
▶
Turn off the water supply and straighten the kink in water hose.
If necessary, replace the water hose.
The ice cube maker has no current.
▶
Call customer service.
→
"Customer service", Page 29
The appliance hums, bubbles,
buzzes, gargles, clicks, crackles or
rumbles.
Not an issue. A motor is running, e.g. refrigerating unit, fan. Refrigerant is flowing
through the pipes. The motor, switches, solenoid valves or water valves are switch-
ing on or off. Automatic defrosting is running.
No action required.
The appliance makes noises. The appliance is not level.
▶
Align the appliance using a bubble level and the screw feet.
The appliance is not free-standing.
▶
Observe the minimum clearances for the appliance.
Fittings wobble or stick.
▶
Check the removable fittings and, if required, replace these.
Bottles or containers are touching.
▶
Move the bottles or containers away from each other.
Super freezing is switched on.
No action required.