Thermador T24UW905LP, Use & Care Manual, Page: 12 / 40

Page |12
Hi-alarm is activated (due to high
temperature inside the appliance), HI is
shown on the display LED.
Appliance opened frequently.
Do not open the appliance unnecessarily.
Press alarm once to deactivate.
The ventilation openings have been
covered.
Remove obstacles at the ventilation
openings located at the base of the unit
and in the refrigerator interiors. Press
alarm once to deactivate.
A large amount of product, or warm
product was placed into the appliance.
Wait until the products cool off or
remove the warm products from the
appliance, then press alarm once to
deactivate.
Excessively warm environment.
Avoid placing the unit in direct sunlight, or
near a heat source. Press alarm once to
deactivate
Door gasket is not sealing.
Inspect the condition of the gasket. If
damaged, cold air can escape the
cabinet and cause the temperature to
rise. Press alarm once to deactivate.
Data Rating Label
The data rating label shows the model and serial number of your appliance. It is located in the interior of the
cabinet, at the opposite side of the hinge.
Service Information
For handy reference, copy the information in the form below from the data rating label located in the interior
of the cabinet, at the opposite side of the hinge. Keep your invoice for Warranty validation.
Model Number
Serial Number
Date of Purchase_
Dealer’s Name
Dealer’s Phone Number
Service Center’s Name
Service Center’s Phone Number