English 20
c) Secure to the sides of the housing framework using
six (6) x 1'' (25.4 mm) mounting screws, 3 per side
as indicated in
Figure 31
.
7. Connect to ductwork
8. Connect electrical wiring
a) Remove the junction box cover (see
Figure 7 on
page 10
).
b) Remove circular knock-out holes located on back
side of the insert (see
Figure 7 on page 10
).
c) Connect wiring for applicable blower motor (see
blower instructions beginning on
page 10).
d) Ensure all controls are in the OFF position. Plug
electrical cord into grounded outlet.
9. Install hood filters, filter spacers, and grease trays
a)
Refer to “Installing Grease Trays, Filter Spacers,
and Filters” on page 22
.
10. Test the installation
a) Test the operation of the blower and the lights.
b) Be sure to check for backdraft. With the blower on
high, close the windows and doors to the area to
ensure that fan does not cause back drafting in any
outlet vent for another appliance.
Custom Insert Installation
with Liner (optional)
The Custom Insert Liner is an optional accessory which,
when used in conjunction with a Custom Insert, will
increase the overall capture area and protect surrounding
building materials.
The liner must be installed before the custom insert.
NOTE: If optional Liner is installed, trim pieces
included with the VCIN Custom Insert are not used.
VCIB Custom Insert model installations that do not use the
included Liner, must order the Hood Trim pieces (TRIMxx)
separately.
1. Turn power OFF
at the service panel. Lock service
panel to prevent power from being turned ON.
2. Prepare ductwork
a)
See “Ductwork Preparation” on page 6
.
b) Install metal transition with backdraft damper so
that the flap opens up toward the ceiling. If
necessary, install thermal break and additional
backdraft damper (refer to
“Hood Transition” on
page 8
).
Figure 31: Side Screws
1" (25.4 mm)
x 6
CAUTION
Before installing, remove the protective plastic film from
all parts.
Liner Model
Insert Model
LINER236
VCIx36JP
LINER248
VCIx48JP
LINER254
VCIx54JP
WARNING
To avoid electrical shock hazard, before installing, switch
power off at the service panel and lock the panel to
prevent the power from being switched on accidentally.
CAUTION
The hood weighs at least 60 lbs; therefore, it
requires at least two people to lift it safely.
Hidden surfaces may have sharp edges. Use
caution when handling the appliance. Failure
to do so may result in property damage or
personal injury.
