IF AN ERROR CODE APPEARS IN THE COOK MODE WINDOW
Section Seven: Service
BEFORE CALLING SERVICE
Your oven is equipped with an
extremely reliable and accurate
electronic control. On the rare
occasion that something occurs
that causes a malfunction, an
error message will appear in the
Oven/Selector window.
If an error code appears:
Turn
the selector knob to OFF, then
tweak or turn the knob slightly to
the left (counterclockwise). This
will usually stop the flashing and
beeping and clear the oven
selector window. It may clear
some errors.
Some errors (E1, E9, E11, E12
and E13) must be cleared by
turning off the oven at the circuit
breaker and then turning it back
on. When an error remains
displayed steadily in the the OFF
position, after attempting to clear
the error, a problem still exists
and a service call is required.
Please have the error code
available when you call for
service. This will help Service
determine the problem.
To avoid unneces-
sary service calls
and inconvenience,
reset the error code
per instructions. If
error code reappears
call for Service.
Code
Results of problem
Action to be taken
E1
Disables
CLEAN
mode in both
ovens. Oven can be used in COOK
modes only.
Follow directions above (“If an error code appears”).
Error will be displayed again if oven selector is
turned to
CLEAN
. To clear, turn off oven at circuit
breaker. If problem repeats, call for Service to be
able to clean oven.
E2
Turns off the oven heat on both
ovens.
Follow directions above (“If an error code appears”).
Error clears when the oven temperature is below
550
°
F. If error remains, call for Service.
E3, E4
Turns off the heat only on the oven
that failed.
E5, E10,
E15
Turns off the heat on both ovens.
E6
Disables
CLEAN
mode on both
ovens. Oven can be used in COOK
modes only.
Follow directions above (“If an error code appears”).
May set to
CLEAN
again. If error persists, call for
Service.
E7
Turns off the heat only on the oven
that failed.
Clear error by turning Oven Selector to another
Mode. If error remains, call for Service.
E8
Turns off the heat only on the oven
that failed.
Follow directions above (“If an error code appears”)
to stop flashing. Error will remain in display until
repaired. Call for Service.
E9, E11,
E12, E14
Turns off the heat only on the oven
that failed.
Follow directions above (“If an error code appears”)
to stop flashing. Error will be displayed again
when
CLEAN
is selected. To clear, turn off oven at
circuit breaker. If error repeats, call for Service to
be able to clean oven.
E13
Turns off the heat only on the oven
that failed.
Tweaking Selector Knob clears display. Try to set
oven again. If error remains, call for Service.
Follow directions above (“If an error code appears”).
If error remains, call for Service.
Follow directions above (“If an error code appears”)
to stop flashing. Error will remain in display until
repaired. Call for Service.
Page 31