9
12
13
#8 x 3 Pan Head Screws
"
The sill's center screw needs
to be installed three inches
off center in the direction of
the active panel.
Using (12) #8 x 3 pan head screws, fasten
frame to rough opening through pre-drilled
holes in frame.
"
Apply a 1/4 continuous bead of clear
sealant along length of inactive sill riser
at locations shown.
"
SECURE FRAME IN ROUGH OPENING
APPLY SEALANT TO INACTIVE DOOR RISER
Sealant
Inactive sill riser
The sill does not have pre-drilled
holes. The screws used on the sill
are installed through the sill cap
base into the sill substrate. There
is a v-groove in the sill cap base
to assist in aligning the screw.
#8 x 3 Pan Head Screws
"
Sill Cap Base
