9
•
Dispose of used batteries as required by
the regulations in your area.
• Do not throw batteries into a fire–risk of explosion!
• The boots must never be machine washed or
hand washed.
•
The drying temperature must not exceed
40 °C / 104 °F. Never dry the Boot Integration
System in a tumble dryer or on a radiator.
DESCRIPTION OF THE DEVICE
Boot Integration System
• Heating level indicator light (1.1)
• Control zone with one button for the 3 heating
levels (1.2)
• Boot Integration System charging connector
(1.3)
• Battery pockets (1.4)
USB charger
• Charge indicator light x 2 (2.1)
• Charger cord with plug (2.2)
• USB connector (2.3)
• Optional wall plug universal charger 5V/2A
(with adaptors for use in different countries)
TECHNICAL SPECIFICATIONS
USB charger (spare part available from Therm-ic)
USB charger*
Input 5V / 2A
Output 4,2V /
1A x 2
Optional wall
plug universal
charger* 5V / 2A
2A (with adaptors
for use in different
countries)
Input 110V -240V ~
(50 - 60 Hz)
max. 300 mA.
Output 5V /
2000 mA.
"Dual" Lithium
batteries*
3,7V / 2600 mAh
* spare parts available from Therm-ic
FIRST USE AND CHARGING THE BATTERIES
The batteries must be charged before first use.
Please ensure that the Therm-ic Boot Integration
System are switched OFF while charging.
1. Plug in the USB cable. The charge indicator
light (2.1) will light up green. Next, plug the
two boot connectors (1.3) into the charger
(2.2). Charging will start automatically and
the charge indicator light (2.1) turns red and
remains on during charging.
2.
When the batteries are fully charged,
charging will stop automatically and the
LEDs in the charge indicator light (2.1) will
turn green again.
3.
Unplug the two Boot Integration System
connectors from the USB charger.
Charging time is approximately 4-6 hours.
Note that at half time of the charging time