therm-ic max powerpack, Instructions For Use Manual

Page: 13 / 112

13
charged status. The Powerpack must be turned off
(level 0) and disconnected from the heating sole
and charger for storage.
Avoid prolonged non-use. In case of long-term
storage, discharge and fully recharge the batteries
every 6 months! Proper storage of the battery
packs maximises the battery performance and
durability.
Clean the parts as needed with a soft, slightly
damp cloth and a mild cleanser.
Attention: Always remove the charger from the
outlet before cleaning it.
METHODS FOR ATTACHING THE
POWERPACKS
Fix the Powerpack to the outer edge of the shoe
with the wire clip (Fig. 1.1). However, for long-term
use, we recommend one of the attachment options
outlined below.
The Powerpacks can be attached as follows:

use the Therm-ic Velcro Strap to fix them to the
shoe or lower leg (Fig. 1.2).

use the Therm-ic Power strap adapter to fix them
directly onto the Velcro strap (picture 2).

Use the Therm-ic ski boot adapter (Fig. 3) or the
Therm-ic Universal Powerpack Adapter to attach
them to the boot (Fig. 4)

Place the Powerpacks into a jacket or trouser
pocket by using the Therm-ic extension cable
(available in 80 cm and 120 cm lengths), or
secure them to the hips (e.g. belt, etc.) (5).
More information is available at www.thermic.com
or from your specialist retailer.
WARNING:
Never fit the Powerpacks to smooth, slippery
surfaces where they could fall off and be lost.