therm-ic I-Pack Mono button B, Manual

Page: 9 / 264

* spare parts available from Therm-ic
FIRST USE AND CHARGING THE BATTERIES
The batteries must be charged before first use.
Please ensure that the Therm-ic Boot Integration
System are switched OFF while charging.
1. Plug in the USB cable. The charge indicator
9
TECHNICAL SPECIFICATIONS
USB charger (spare part available from Therm-ic)
USB charger* Input 5V / 2A Output 4,2V / 1A x 2
Optional wall
plug universal
charger* 5V / 2A
(with adaptors for
use in different
countries)
Input 110V -240V ~
(50 - 60 Hz)
max. 300 mA.
Output 5V / 2000 mA.
"Dual" Lithium
batteries*
3,7V / 2600 mAh
light (2.1) will light up green. Next, plug the
two boot connectors (1.3) into the charger
(2.2). Charging will start automatically and
the charge indicator light (2.1) turns red and
remains on during charging.
2. When the batteries are fully charged,
charging will stop automatically and the
LEDs in the charge indicator light (2.1) will
turn green again.
3. Unplug the two Boot Integration System
connectors from the USB charger.
Charging time is approximately 4-6 hours.
Note that at half time of the charging time
mentioned above, the battery is already
charged at around 75% of its maximum
capacity (fast charging process). Lab test
done using Therm-ic USB wall plug universal
charger (optional).