exp 1 and holds
10
Exp 1 is an expression pedal or CV input that can be assigned
to 4 different parameters.
1+2 pitch : controls pitch of both oscillators. Can be used with
external keyboard with 1V/oct CV output.
2 pitch : controls pitch of oscillator 2. An expression pedal w/
attenuation can be used to bend osc 2 to a set interval.
2 pwm : changes the width of the pulse wave of oscillator 2.
Best used when set to 30% pulse.
1+2 gain : controls the volume of both oscillators. Use a pedal
instead of the intensity keys or modulate with CV source.
The hold knobs control the volume of each oscillator and can
be used to "hold" the position of each intensity key.
hold
hold
2 pitch
2 pwm
1+2 pitch
1+2 gain
exp 1 function
A 1/4" mono cord can be used on
the side panel to create custom
patches. Here are some examples:
ring -> exp 2 : filter cutoff frequency
will change with ring position.
[2] -> exp 2 : control the filter cutoff
with intensity key 2. Optionally
mute oscillator 2 by turning sync on
and setting this oscillator to the
lowest octave.
Tune Out -> exp 2 : use osc 2 as an
LFO by setting it to "Low" and
disabling ring > osc 2.
[2] -> exp 1 @ 2 pwm : osc 2 pulse
width changes with amplitude.
The filter cutoff knob changes the
range when using the exp input.
11
exp 2
ring
exp 1
Summary of Contents for ET-4.3
Page 1: ...ET 4 3 user manual ...
