9
exp and cv jacks
The ET-4.3 has two expression pedal inputs. Exp 1 can be assigned to
different parameters using the Exp 1 Function switch. Exp 2 can be
used to control the filter cutoff frequency. Use a 1/4" TRS plug with an
appropriate pedal. The exp input can also accept an external CV
within 0 and +10V.
To interface with external synthesizer gear, control voltage outputs are
available on the side panel. A 1V/oct CV for the ring is available, as
well as control voltage outputs for each intensity key.
exp 2
ring
exp 1
8
power and outputs
The ET-4.3 is powered by a 16VAC 1000mA adapter.
Osc 1+2 is a stereo TRS output with each oscillator on a separate
channel. These signals are taken before the filter and reverb.
An instrument tuner can be plugged directly into the front panel.
The output is a line-level signal, appropriate for most recording
equipment, amplifiers and effects. Lower the output volume if you
experience unwanted distortion.
output
tuner
power
osc 1+2
16VAC
Summary of Contents for ET-4.3
Page 1: ...ET 4 3 user manual ...
