4
THERAFLO REPLACEMENT PARTS DIAGRAM
THERAFLO REPLACEMENT PARTS TABLE
REF NO.
PART NO.
DESCRIPTION
1 & 2
THERAF4320
Hand Knob Kit for Strainer Cover (inc Hand Knob &
Swivel Nut)
3
THERAF4304
Strainer Cover, Hand Knob Style - Clear
4
THERAF4303
Strainer Cover O-Ring
5
THERAF4302
Basket
6
THERAF4301B
Pump Housing/Strainer - 50mm, w/Drain Plugs, threaded
external
7 & 8
THERAF4318
Drain Plug with O-Ring
9
THERAF4317
Mounting Foot Cap Screw (set of 2)
10
THERAF4316B
Mounting Bracket, hps style
11
THERAF4323
Spacer for motor support (required only for 1hp model)
12, 13, 14
THERAF4321
Union Kit (set of 2) suit 40mm & 50mm w/Gasket (T-Seal)
15
THERAF4322
Union Gasket (T-Seal)
16
THERAF4305
Housing Gasket
17
THERAF4323B
Diffuser Gasket
18
THERAF4306C
Diffuser
19
THERAF4307B
Impeller Ring
20
THERAF4308K
Impeller 1HPVS (required only for 1hp model)
21
THERAF4309B
Seal Assembly (inc, Mechanical Seal and Slinger)
22
THERAF4312B
Slinger
23
THERAF4310B
Seal Plate
24
THERAF4311B
Motor Cap Screw (4 required)
25
THERAF4313B
Motor Mounting Plate
26
THERAF4315K
Motor 1HPVS (required only for 1hp model)
27
THERAF4314
Housing Cap Screw (6 required)
THERAF4308H
Impeller 1.5HPVS (required only for 1.5hp model)
THERAF4315L
Motor 1.5HPVS (required only for 1.5hp model)
THERAFLO REPLACEMENT PARTS DIAGRAM
THERAFLO REPLACEMENT PARTS TABLE
REF NO.
PART NO.
DESCRIPTION
1 & 2
THERAF4320
Hand Knob Kit for Strainer Cover (inc Hand Knob &
Swivel Nut)
3
THERAF4304
Strainer Cover, Hand Knob Style - Clear
4
THERAF4303
Strainer Cover O-Ring
5
THERAF4302
Basket
6
THERAF4301B
Pump Housing/Strainer - 50mm, w/Drain Plugs, threaded
external
7 & 8
THERAF4318
Drain Plug with O-Ring
9
THERAF4317
Mounting Foot Cap Screw (set of 2)
10
THERAF4316B
Mounting Bracket, hps style
11
THERAF4323
Spacer for motor support (required only for 1hp model)
12, 13, 14
THERAF4321
Union Kit (set of 2) suit 40mm & 50mm w/Gasket (T-Seal)
15
THERAF4322
Union Gasket (T-Seal)
16
THERAF4305
Housing Gasket
17
THERAF4323B
Diffuser Gasket
18
THERAF4306C
Diffuser
19
THERAF4307B
Impeller Ring
20
THERAF4308K
Impeller 1HPVS (required only for 1hp model)
21
THERAF4309B
Seal Assembly (inc, Mechanical Seal and Slinger)
22
THERAF4312B
Slinger
23
THERAF4310B
Seal Plate
24
THERAF4311B
Motor Cap Screw (4 required)
25
THERAF4313B
Motor Mounting Plate
26
THERAF4315K
Motor 1HPVS (required only for 1hp model)
27
THERAF4314
Housing Cap Screw (6 required)
THERAF4308H
Impeller 1.5HPVS (required only for 1.5hp model)
THERAF4315L
Motor 1.5HPVS (required only for 1.5hp model)
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING –
Risk of Electric Shock. All electrical
wiring must be performed by a qualified electrical
contractor, and must conform to Local/State/Federal
electrical regulations and the Latest Edition of AS/NZ
3000 Wiring Rules. All electrical circuits must be supplied
through a Residual Current Device - RCD (Safety Switch),
with a residual operating current not exceeding 30 mA.
Hazardous voltage can shock, burn and cause death or
serious property damage. To reduce the risk of electric
shock, do NOT use an extension cord to connect unit to
the electricity supply.
WARNING –
To reduce the risk of electric shock replace damaged
wiring immediately. Locate the power cord so that it cannot be damaged by lawn
mowers, hedge trimmers and other equipment.
WARNING –
Never operate the circulation system at more than 344
kPa (50 PSI) maximum.
WARNING –
Automatic Restart. The pump motor is automatically
protected from overheating. If such an error occurs, the pump will automatically
restart once the temperature is at a safe level to do so without warning. If a
power failure occurs while the pump is running, it will automatically restart once
the power has been restored.
WARNING –
Damaged Supply Cord.
If the power supply cord is
damaged it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Before installing or servicing this electrical equipment, disconnect it from the power supply
WARNING –
This manual contains important information about the
installation, operation, and safe use of this pump that must be transferred
through to the end user of this product.
WARNING –
This product should be installed and serviced only by a
qualified professional.
WARNING –
All electrical wiring MUST be performed by a qualified
electrical contractor, and must conform to Local/State/Federal electrical
regulations and the Latest Edition of AS/NZS 3000 Wiring Rules.
WARNING –
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilites, or lack
of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their
safety. CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT
PLAY WITH THE APPLIANCE.
CAUTION –
This pump is intended for use on permanently installed
swimming pools and may also be used with hot tubs and spas if so marked. Do
NOT use with storable pools. A permanently installed pool is constructed in or on
the ground or in a building such that it cannot be readily disassembled for
storage. A storable pool is constructed so that it is capable of being readily
disassembled for storage and reassembled to its original integrity. Though this
product is designed for outdoor use, it is strongly advised to protect the electrical
components from the weather. Select a well-drained area, one that will not flood
when it rains. It requires free circulation of air for cooling. Do not install in a damp
or non-ventilated location. If installed within an outer enclosure or beneath the
skirt of a hot tub or spa, adequate ventilation and free circulation of air must be
provided to prevent overheating of the motor.
WARNING –
Pool and spa components have a finite life. All
components should be inspected frequently and replaced at least every ten
years, or if found to be damaged, broken, cracked, missing, or not securely
attached.
Before installing or servicing this electrical equipment, disconnect it from the power supply
WARNING
Read and follo
w all instructions in this
owner’s manual and
on the equipment. Failure to follow instructions can cause
severe injury and/or death.
MAXIMUM TOTAL HEAD
Model
Max. Total Head Input kW I n p u t
Amps
Noise
dB(A) 1m
(kg)
We i g h t
Ingress
Protection
VS 1hp
15.5m - 152kPa
1.03kW
6.0
< 70
11
IPX5
VS 1.5hp
16.5m - 162kPa
1.08kW
7.0
< 70
12.4
IPX5