POOL+ MANAGER App A2 - User Manual v1.0
9
2.
TEMPERATURE
SETTINGS
When you enter Temperature Settings, the first setting that will be displayed is:
POOL
TEMPERATURE 27
o
.
**
Range is OFF, 20
o
c to 40
o
c in 1
o
c increments. Default is 27
o
c.**
This temperature is the minimum pool temperature that you would like the Heater to
heat the pool to if a heater is utilised.
The temperature limit can be increased or decreased with the
↑
or
↓
buttons to a
temperature of your choice.
Once you have selected a Pool Temperature, press Enter and the temperature will be
set. The controller will then display:
SPA
TEMPERATURE 37
o
c.
**Range is OFF, 20
o
c to 40
o
c in 1
o
c increments. Default is 37
o
c.**
This is the temperature that you would like the SPA to be at when in use.
The temperature limit can be increased or decreased with the
↑
or
↓
buttons to a
temperature of your choice.
Once you have selected a Pool Temperature, press Enter and the temperature will be
set. The controller will then display:
SOLAR
TEMPERATURE 30
o
c.
**Range is OFF, 20
o
c to 40
o
c in 1
o
c increments. Default is 30
o
c.**
This is the temperature you would like the solar to heat the pool to, if it is utilised.
The temperature limit can be increased or decreased with the
↑
or
↓
buttons to a
temperature of your choice. Once you have selected a Pool Temperature, press Enter
and the temperature will be set.
The controller will then return you to the Main Menu.
3.
MANUAL ON
In this menu setting you will be able to manually turn on any socket or valve that has
been allocated an appliance.
Socket 1 through to 8, and valve 1 through to 4, if allocated.
Press Enter to open the setting and the controller will display:
S1: XXXXXXXXX
AUTO
Use the
↑
or
↓
buttons to move between the allocated sockets and valves.
If a socket or valve hasn’t been allocated an appliance, then it won’t be shown.
Press the Enter button to toggle between; AUTO, OFF, & ON.
Press the Auto Button to return all appliances to normal automatic operation
.
Please remember that you will also need to turn the appliance back to Auto,
otherwise it will continue to run.
Note 1: If a socket has been set to ALWAYS ON, then you won’t be able to turn it on manually.
Note 2: If a valve has been allocated to Pool/Spa, you will not be able to turn it on using this
menu option.
