POOL+ MANAGER App A2 - User Manual v1.0
14
6.2
PUMP
In this menu option, you will be able to select which type and brand of filtration pump
your system is running and what its default speed will be.
When you Enter this sub menu option, the controller will display the option to choose
either a Single Speed Pump or Multi Speed Pump:
PUMP TYPE
MULTI-SPEED
Use the
↑
or
↓
buttons to switch between the 2 options, press Enter to accept the
option you require.
If you Enter SINGLE SPEED, the controller will accept the option and return you to the
Installer Setup Menu.
If you Enter MULTI SPEED, then the controller will display:
PUMP BRAND
THERALUX.
Use the
↑
or
↓
buttons to scroll through the range of allowable pump brands. Press
Enter on the brand you wish to select when you see it displayed.
The options for brands of Multi Speed Pumps are:
Theralux
Reltech
Theralux 485
Reltech 485
Pentair VS/F
Insnrg
DAB
Once you have pressed Enter to select the pump, the controller will ask you to set 4
pump speeds.
In the case of the Theralux 485, Reltech 485 & Insnrg brands you will be asked
to set the speeds in RPM.
In the case of the Pentair VS/F, Theralux, and Reltech pumps, you will be asked
to set the default speed only as the pump has pre-set speeds.
In the case the DAB brand, you will be asked to set the 4 speeds as a
percentage.
Note: The Theralux and Reltech pumps only have 3 speeds to choose from and need to
be set via the manufacturer’s instructions.
Once the speeds have been set for the Theralux 485, Relthech 485, Insnrg, and DAB
pumps, the controller will then ask what Default speed you would like the pump to be
set at.
This is displayed as:
PUMP DEFAULT
SPEED X
Use the
↑
or
↓
buttons to scroll through the range of pump speeds (1, 2, 3, & 4) that
you have just set.
Once you have adjusted the default speed, press Enter to accept.
The controller will accept the default speed and return to the Installer Setup Menu.
