| 25 |
Remote control (THERA-fit plus)
The transmitter of the infrared remote control
is behind the red covering disc of the remote
control
8
. The receiver is behind the black
covering
9
of the device.
❑
Never press the covering of the re-
ceiver 9.
❑
Make sure that the transmitter of the re-
mote control 8 always shows towards
the receiver 9.
Is this not the case the device will automat-
ically stop.
ON/OFF
By pressing the On/Off button
you switch on or off the remote
control
8
. The lightning diodes
on the remote control
8
show you afterwards
the preset operating state:
❑
Direction of rotation = forward
❑
Number of revolutions = 0 revolutions/min
❑
Motor power = maximum (ca. 15 Nm)
The light diode of the receiver
9
lights green.
To start the device increase the number of
revolutions.
If there are pressed no buttons on the remote
control
8
for approx. 20 min. it stops automat-
ically.
Direction of rotation
The sense of rotation is
shown with the yellow diodes
on the buttons for the direction of rotation. By
pressing the corresponding button (arrow for-
ward/arrow backward) you can choose the
right direction.
The change of the direction happens with a
soft stop and a soft start. All of the other pa-
rameters stay the same (number of rotations,
motor power).
Number of rotations
You can achieve an increase
of the number of rotations by
pressing the “rabbit” button. To increase the
number of rotations step by step press the
button only short.
The light diodes show you the actual number
of rotation in 5 steps. The fifth step is accord-
ing to a maximum number of rotations of 60
rotations per minute.
You can reduce the number of rotations until
stop by pressing the “snail” button.
Stay on the “rabbit” or “snail” button for some
time to change the number of rotations con-
stantly to maximum or stop.
When the foot-rests are fitted, do not
start the motor until your feet are pro-
perly in the foot-rests and secured in
position.
Resistance of the motor
The motor power has differ-
ent means for active and
passive training:
Active training:
You can adjust the braking
resistance of the device by regulating the
power of the motor. By training actively, the
motor power shows you the resistance you
have to overcome with muscle power.
The more the display moves to the right the
bigger is the braking resistance.
Passive training:
The adjustment of the mo-
tor power shows you the maximum power the
motor uses to move the foot-rest/therapy-
grips. You can adjust the power that effects
your body with the adjustment of the motor
power.
Brake power adjustment for
THERA-fit
The brake resistance can be varied stepless
with the adjustment button
9
. To increase the
brake resistance turn it to the right, to de-
crease it turn the adjustment button to the left.
D
Summary of Contents for THERA-fit
Page 2: ...1 2 3 4 5 6 7 8 9...
Page 3: ...A B C 11 D E F G 10 H 20 cm I J K Reserve...
Page 38: ...35 Notes...
Page 39: ...36 Notes...
