Themis RES - 32XR3 Installation Manual Download Page 25

Page: 25 / 142

Preface

Website Information

xxiii

Themis Computer

• PXH/V

An overview of RES-21XR3 design and specifications is given in Chapter 1, "Over-
view and Specifications", of this manual.

This manual is intended for an experienced system administrator with a knowledge
of both networking and high-speed server systems.

Website Information

Themis Computer corporate and product information may be accessed on the World
Wide Web by browsing the website

http://www.themis.com

Your Comments are Welcome

We are interested in improving our documentation and welcome your comments and
suggestions. You can email your comments to us at

[email protected]

Please include the document part number in the subject line of your email.

Notes, Cautions, Warnings, and Sidebars

The following icons and formatted text are included in this document for the reasons
described:

Note:

A note provides additional information concerning the procedure or action

being described.

Summary of Contents for RES - 32XR3















































































































































Search results

Summary of Contents for RES - 32XR3

Reviews:

Related manuals for RES - 32XR3

Brands by name

Popular brands

Themis RES - 32XR3, Installation Manual

Search results

Summary of Contents for RES - 32XR3

Reviews:

Related manuals for RES - 32XR3

Brands by name

Popular brands