Themis CoolShell 3U, Installation Manual

Page: 76 / 158

CoolShell 3U Generation 2 Installation Manual Version 1.1
B-6
Themis Computer
B.3.1.2 AddOn ROM Display Mode
This sets the display mode for the Option ROM. Select Keep Current to use the cur-
rent AddOn ROM Display setting. Select Force BIOS to use the Option ROM dis-
play mode set by the system BIOS. The options are
Force BIOS (default) and Keep
Current.
B.3.1.3 Bootup Num-Lock
This feature selects the Power-on state for Numlock key. The options are Off and On
(default).
B.3.1.4 Wait For 'F1' If Error
This forces the system to wait until the 'F1' key is pressed if an error occurs. The
options are Disabled and
Enabled (default).
B.3.1.5 Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will “capture” Interrupt
19 at boot and allow the drives that are attached to these host adaptors to function as
bootable disks. If this item is set to Disabled, the ROM BIOS of the host adaptors
will not capture Interrupt 19, and the drives attached to these adaptors will not func-
tion as bootable devices. The options are
Enabled (default) and Disabled.
B.3.2 Power Configuration
B.3.2.1 Power Button Function
If set to Instant_Off, the system will power off immediately as soon as the user hits
the power button. If set to 4_Second_Override, the system will power off when the
user presses the power button for 4 seconds or longer. The options are
Instant_Off
(default) and 4_Second_Override.
B.3.2.2 Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for the
system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last state before a power loss. The options are Power-On, Power-Off and
Last State (default).