manualshive.com logo in svg

Thecus N8800 IP, User Manual, Page: 80 / 143

Share
Download
Thecus N8800 IP User Manual Download Page 80

 

 

A description of each item follows: 

 

ADS/NT Support 

Item Description 

Work Group / Domain 
Name 

Specifies the SMB/CIFS Work Group / ADS Domain Name (e.g. 
N8800). 

ADS/NT Support 

Select Disable to disable authentication through Windows Active 
Directory Server or Windows NT. 

Authentication Method  Select ADS for Windows Active Directory Server, or select NT for 

Windows NT 

ADS/NT Server Name 

Specifies the ADS/NT server name (e.g. adservername). 

ADS/NT Realm 

Specifies the ADS/NT realm (e.g. example.com). 

Administrator ID 

Enter the administrators ID of Windows Active Directory or 
Windows NT, which is required for N8800 to join domain. 

Administrator 
Password 

Enter the ADS/NT Administrator password. 

Apply 

To save your settings. 

 

 

To join an AD domain, you can refer 

the figure and use the example below 

to configure the N8800 for associated 

filed input: 
 

 

 
 
 
 
 
 
 
 
 

 80 

Summary of Contents for N8800 IP
















































































































































Reviews:

No comments