Replacing Damaged Hard Drives
system’s
utomatic data recovery.
age
When a hard drive is damaged and data in the RAID volume, the system LCD will
2.
For 3.5” HDD
a.
Release the thumbscrews.
b.
Remove the HDD by pull out HDD
stall new hard disk(s).
3 until they snap into place.
ith 2.5” HDD cage
the 2.5” HDD tray
failure hard disk
into place.
4. Replace the N0503 front cover.
hen using RAID 1, 5, 6, or 10 on the N0503, you can use the auto-rebuild function
eeps and/or an email notification is sent
s mentioned above to replace the failed hard disk.
new hard disk and starts the
its status before the hard disk crash.
If you are using RAID 1, RAID 5, or RAID 6 you can easily replace a damaged hard
drive in the Thecus N0503 while keeping your data secure with the
a
Hard Drive Dam
display warning message also the system beeps.
Replacing a Hard Drive
To replace a hard disk drive in the N0503:
1.
Open front door of the N0503.
c.
Get the hard drive rails and in
d.
Slide hard disks into the N050
e.
Replace the thumbscrews.
3.
For 2.5” HDD
a.
It has come w
b.
Remove
c.
Remove
d.
Install new HDD into
e.
Slide into 2.5” HDD cage till it snap
RAID Auto-Rebuild
W
when an error is detected.
1.
When a hard disk fails the system b
to specified receivers.
2.
Check the LCD to see which disk has failed.
3.
Follow the step
4.
The system automatically recognizes the
auto-rebuild sequence to resume
113
