19
BATTERY REPLACEMENT
temperature. The more of activating frequency and the
lower of environmental temperature is, the sooner the
power consumes. We like to remind you to take off the
battery when the power is insufficient or you will be long
period not to use the Transmitter TRA 69 HF. In
addition, please note that reverse polarity may be
subject Transmitter TRA 69 HF to damage
(See Fig.
Transmitter TRA 69 HF requires a 12V A23 battery.
When the battery is in low battery status, LED gets faint
or it becomes difficult to operate the receiver, please
replace the battery.
Please follow the steps below for changing the battery.
1. Loosen the screws of cover with a crosshead screw-
driver and take it off from the bottom case
(See Fig.1).
2. Take out the used battery and put in a new battery.
3. Cover the bottom case and tighten the screws with a
crosshead screwdriver.
Fig. 4
illumination level will remain at previous rating which is
the value before the lighting device was turned off.
When combining chime or alert receiver has no dimmer
function, TRA 69 HF can only activate the receiver, but
can not DIM control the receiver.
Manuale_TRA69HF 2004.3.3 2:59 PM Page 19
