5
Product overview
Type of
installation
Channel Operating
voltage
Colour
Type
Item
number
Ceiling
installation
Light
230V AC
White
theRonda
S360 -100 DE
WH
2080560
Ceiling
installation
Light
230V AC
Grey
theRonda
S360-100
DE GR
2080561
Ceiling
installation
Light
230V AC
Special colour
in accordance
with customer
information
theRonda
S360-100
DE SF
2080563
Ceiling
installation
Light
230V AC
White
theRonda
S360-100 AP
WH
2080550
Ceiling
installation
Light
230V AC
Grey
theRonda
S360-100
AP GR
2080551
Ceiling
installation
Light
230V AC
Special colour
in accordance
with customer
information
theRonda
S360-100
AP SF
2080553
Troubleshooting
Fault
Cause
Light does not switch
on if presence is
detected and in
darkness
Lux value is set too low; light was switched off
via theSenda S; person not within detection area;
obstruction(s) interrupting detection; time delay
set too short
Light does not switch
off and/or light
switches on spontane-
ously when no one is
present
Wait for time delay;
thermal sources of interference in the detection
area: fan heaters, incandescent lamps/halogen
spotlights, moving objects (e.g. curtains hanging in
open windows);
Load (EBs, relays) not cleared
Error flashing
(4 x per second)
Error in self-test;
Device not properly functional!
LED display
LED
Description
Flashing at
1 second
intervals
The presence detector is in the start-up phase.
Flickering
for 2s
The command sent from the remote control via infrared
was accepted by the presence detector.
Lighting up
briefly
The command sent from the remote control via infrared
was rejected by the presence detector. The command is
not valid. Check the detector type or parameter selected
in the "SendoPro".
Fast flashing
Error flashing; The presence detector has found an error.
Lights up
or flickers
irregularly
The presence detector is in detection area test mode or
"LED display movement" is activated. The LED displays
detection of movement.
Guarantee
Theben HTS presence detectors are manufactured with
the utmost care using state-of-the-art technology and are
quality-tested. Theben HTS AG therefore guarantees perfect
operation when used correctly. Should a fault occur, Theben
HTS AG will fulfil the guarantee within the scope of the gene-
ral terms and conditions.
Please note in particular:
•
that the guarantee period lasts 24 months from the date
of manufacture.
•
that the guarantee is invalidated if you, or a third party,
make changes to or undertake repairs on the devices.
•
that, insofar as the presence detectors are connected
to a software-controlled system, the guarantee for this
connection is only valid when the indicated interface
specification is complied with.
We undertake to repair or replace as quickly as possible
all components of the delivered device that have become
defective or unusable through demonstrably poor material,
faulty construction or incomplete delivery up to the end of the
guarantee period.
Returns
In the event of a guarantee claim, please return the device to
the relevant dealer together with the delivery note and a brief
description of the fault.
Industrial property rights
The design as well as hardware and software of these devices
are protected by copyright.
Dimensions diagrams
theRonda S360-100 DE
theRonda S360-100 AP
